Glossary entry (derived from question below)
Russian term or phrase:
толщина нефтенас. (м)
English translation:
oil saturation thickness
Added to glossary by
Piotrnikitin
May 4, 2020 19:31
4 yrs ago
14 viewers *
Russian term
толщина нефтенас. (м)
Russian to English
Tech/Engineering
Petroleum Eng/Sci
Из таблицы, имеющей отношения к нефтяным скважинам, приведенной в годовом отчете нефтяной компании. Как я понимаю, "нефтенас." - это "нефтенасыщеность". Больше ничего не понимаю. Прошу помощь нефтянников.
Proposed translations
(English)
2 | oil saturation thickness | Frank Szmulowicz, Ph. D. |
3 +2 | net pay | Anton Ievlev |
4 | oil saturation | Ravindra Godbole |
3 | pumping thickmess (m) or (meters)) | mrrafe |
Proposed translations
1 hr
Selected
oil saturation thickness
TBD.
--------------------------------------------------
Note added at 4 hrs (2020-05-04 23:31:33 GMT)
--------------------------------------------------
This article describes the key issues arising from the development of such deposits and the ways of their solution — in particular, the problem of gas breakout to extractive well cap hole that leads to the inevitable wells, “aeration” and a sharp decrease in oil production. In this connection, a question arises about the cost-effectiveness of the development of undergas deposits with negligible oil-saturation thickness — oil rims.
https://vestnik.utmn.ru/upload/uf/00d/2016_2_fizmat.pdf
ccccccc
Для оценки максимальной, предельно возможной величины вертикальных
смещений земной поверхности принято условие, что все изменение порового объема происходит за счет деформации породы в вертикальном направлении. В этом случае будет справедлива следующая формула:
пор ∆= ∆ h mH P β , (2)
где H — эффективная толщина нефтенасыщенности.
https://www.tyuiu.ru/wp-content/uploads/2018/10/NIG_-1_2017....
We have built a graph of the initial flow of oil
from the effective oil saturation thickness and
stimulation for depression in Oriv–Ulychna field, and
found that the most effective filtration occurs with
depression stimulation up to 7.5 MPa. In this case oil
flows through cracks from the adjacent porous reservoir
matrix that provides sustainable flow rates and rational
oil withdrawal regardless the effective thickness of
deposits.
http://elar.nung.edu.ua/bitstream/123456789/103/4/4945p.pdf
cccccccccccc
According to regional correlations, the hydrocarbon saturation ratio is at 0.20 for Umid field, as in
the fields located on the anticlinal line of Sangachal – Duvanny-Deniz – Khare-Zira Island – Babek. In other words, closed horizontal at 6.000 m is determined. According to the data obtained from the wells № 12 and 14, the minimum oil saturation thickness is 2 m, according to the data of regional correlation and wells drilled in Umid field, the average effective oil saturation thickness is 23 m, according to the geophysical research data of the wells № 4 and 6,2 m, the maximum effective oil saturation thickness is 35 m.
http://id-yug.com/images/id-yug/Bulatov/2019/1/PDF/2019-1.pd...
--------------------------------------------------
Note added at 4 hrs (2020-05-04 23:31:33 GMT)
--------------------------------------------------
This article describes the key issues arising from the development of such deposits and the ways of their solution — in particular, the problem of gas breakout to extractive well cap hole that leads to the inevitable wells, “aeration” and a sharp decrease in oil production. In this connection, a question arises about the cost-effectiveness of the development of undergas deposits with negligible oil-saturation thickness — oil rims.
https://vestnik.utmn.ru/upload/uf/00d/2016_2_fizmat.pdf
ccccccc
Для оценки максимальной, предельно возможной величины вертикальных
смещений земной поверхности принято условие, что все изменение порового объема происходит за счет деформации породы в вертикальном направлении. В этом случае будет справедлива следующая формула:
пор ∆= ∆ h mH P β , (2)
где H — эффективная толщина нефтенасыщенности.
https://www.tyuiu.ru/wp-content/uploads/2018/10/NIG_-1_2017....
We have built a graph of the initial flow of oil
from the effective oil saturation thickness and
stimulation for depression in Oriv–Ulychna field, and
found that the most effective filtration occurs with
depression stimulation up to 7.5 MPa. In this case oil
flows through cracks from the adjacent porous reservoir
matrix that provides sustainable flow rates and rational
oil withdrawal regardless the effective thickness of
deposits.
http://elar.nung.edu.ua/bitstream/123456789/103/4/4945p.pdf
cccccccccccc
According to regional correlations, the hydrocarbon saturation ratio is at 0.20 for Umid field, as in
the fields located on the anticlinal line of Sangachal – Duvanny-Deniz – Khare-Zira Island – Babek. In other words, closed horizontal at 6.000 m is determined. According to the data obtained from the wells № 12 and 14, the minimum oil saturation thickness is 2 m, according to the data of regional correlation and wells drilled in Umid field, the average effective oil saturation thickness is 23 m, according to the geophysical research data of the wells № 4 and 6,2 m, the maximum effective oil saturation thickness is 35 m.
http://id-yug.com/images/id-yug/Bulatov/2019/1/PDF/2019-1.pd...
4 KudoZ points awarded for this answer.
Comment: "Thanks. I prefer this to "net pay" even if correct since the document is being translated for lawyers rather than oilmen. Overly technical terms, even if correct, may confuse them. "
58 mins
pumping thickmess (m) or (meters))
+2
49 mins
net pay
См. изображения по ссылкам.
--------------------------------------------------
Note added at 59 mins (2020-05-04 20:30:44 GMT)
--------------------------------------------------
Из wiki:
https://en.wikipedia.org/wiki/Pay_(geology)
--------------------------------------------------
Note added at 59 mins (2020-05-04 20:30:44 GMT)
--------------------------------------------------
Из wiki:
https://en.wikipedia.org/wiki/Pay_(geology)
Reference:
8 hrs
oil saturation
no need of word thickness
Something went wrong...