Nov 7, 2019 20:30
4 yrs ago
2 viewers *
English term
clear specific
English to Polish
Tech/Engineering
Automotive / Cars & Trucks
5. Always check for clearance between the retainer and the inside face of the rocker arm. This will be most evident while the valve is on the seat. Rocker arms are designed to clear specific spring diameters, so you should check to see that you have the proper rocker arm/retainer combination. This situation can also be the result of improper rocker geometry and may be corrected with different length pushrods or a different length valve.
6. To aid in the engine breaking process, spray the springs, rocker arms and pushrods with COMP Cams® Valve Train Assembly Spray (Part #106).
Zaprojektowane pod określoną średnicę sprężyn ?
6. To aid in the engine breaking process, spray the springs, rocker arms and pushrods with COMP Cams® Valve Train Assembly Spray (Part #106).
Zaprojektowane pod określoną średnicę sprężyn ?
Proposed translations
1 hr
Selected
do pracy z konkretnymi/specyficznymi
popyczacze sa zaprojektowane/przeznaczone do pracy ze sprężynami o specyficznych/swoistych/szcególnych średnicach .....
4 KudoZ points awarded for this answer.
Comment: "Dziękuje bardzo"
36 mins
pasować (mieć prześwit) do określonych średnic sprężyn
Clear tutaj oznacza clearance, czyli prześwit, więc w sensie pasować.
--------------------------------------------------
Note added at 43 mins (2019-11-07 21:14:09 GMT)
--------------------------------------------------
Inna opcja: zapewnić wystarczający luz
--------------------------------------------------
Note added at 51 mins (2019-11-07 21:21:58 GMT)
--------------------------------------------------
ccccccc
Here, the rocker arm must not interfere with the spring below.
https://images.autoserviceprofessional.com/post/M-LS-cylinde...
ccccccccccccccccc
Beyond a certain diameter, there will be rocker arm - spring interference (luz ujemny).
Scorpion Race Series Rocker Arms 1017
Rocker Arm Ratio:1.6
Maximum Spring Diameter (in):1.625 in.
https://www.summitracing.com/parts/scc-scp1017/overview/
ccccccccccccccccccccc
--------------------------------------------------
Note added at 43 mins (2019-11-07 21:14:09 GMT)
--------------------------------------------------
Inna opcja: zapewnić wystarczający luz
--------------------------------------------------
Note added at 51 mins (2019-11-07 21:21:58 GMT)
--------------------------------------------------
ccccccc
Here, the rocker arm must not interfere with the spring below.
https://images.autoserviceprofessional.com/post/M-LS-cylinde...
ccccccccccccccccc
Beyond a certain diameter, there will be rocker arm - spring interference (luz ujemny).
Scorpion Race Series Rocker Arms 1017
Rocker Arm Ratio:1.6
Maximum Spring Diameter (in):1.625 in.
https://www.summitracing.com/parts/scc-scp1017/overview/
ccccccccccccccccccccc
16 hrs
mają wchodzić w konkretne/się mieścić w konkretne
Zdaje się że chodzi o dźwigienki zaworowe w głowicy silnika, które mają od zewnątrz nasunięte sprężyny. Chodzi o ustawianie luzu zaworowego.
Something went wrong...