Glossary entry (derived from question below)
German term or phrase:
2x5 Achsen CNC-Profilbearbeitungszentrum
English translation:
2x5 axis CNC profile milling centre
Added to glossary by
Rod Darby (X)
Jun 27, 2004 13:07
19 yrs ago
German term
2x5 Achsen CNC-Profilbearbeitungszentrum
German to English
Tech/Engineering
Engineering (general)
. . . wurden drei Maschinen für die Fertigung . . . geleast. Im Einzelnen handelt es sich um eine HSC Fräsmaschine, ein 2x5 Achsen CNC-Profilbearbeitungszentrum sowie eine 3-Koordinaten CNC-Messmaschine . . .
Proposed translations
(English)
| 3 +2 | 2x5 axes CNC profile milling centre |
Kim Metzger
|
Proposed translations
+2
6 mins
Kim Metzger
Mexico
Mexico
Native in English
Works in field
Mexico
Committed to Quality and Service
Native in: English (Variant: US) 
Works in: German to English
Related KudoZ points
:
407
Selected
2x5 axes CNC profile milling centre
Since 1997 BUFFOLI has introduced 3 new flexible machining systems into its production program.
They are four-spindle machining centers with 2x5 axes and two flexible transfer machines
http://www.buffoli.com/products/machines_lines/flexible-mach...
When secondary edge details are required or when the profile must be machined for aesthetic reasons, we provide full CNC profile milling of your parts. Accurate and repeatable profile dimensions simplify the setup and fixturing of additional machining operations and also reduce tool and equipment wear.
http://www.sppusa.com/home/products/machined/
--------------------------------------------------
Note added at 2 hrs 16 mins (2004-06-27 15:23:01 GMT)
--------------------------------------------------
Hi Rob, I\'m sure one of our engineers could do a better job explaining it than I can, but here\'s a stab at it. Some tools, like a radial-arm saw, can be adjusted to operate at different angles. These are the axes (plural of axis). Horizontal, vertical, diagonal, etc. axes.
--------------------------------------------------
Note added at 2 hrs 17 mins (2004-06-27 15:24:15 GMT)
--------------------------------------------------
Hi Rod!
--------------------------------------------------
Note added at 3 hrs 32 mins (2004-06-27 16:39:24 GMT)
--------------------------------------------------
Not too many hits for either 2x5 axes or 2x5 axis as an adjective, but \"axes\" is used at an Italian and French site and \"axis\" at this UK site.
2x5 Axis facility available with machining possible to high tolerances.
http://www.eccles.co.uk/cnc.htm
They are four-spindle machining centers with 2x5 axes and two flexible transfer machines
http://www.buffoli.com/products/machines_lines/flexible-mach...
When secondary edge details are required or when the profile must be machined for aesthetic reasons, we provide full CNC profile milling of your parts. Accurate and repeatable profile dimensions simplify the setup and fixturing of additional machining operations and also reduce tool and equipment wear.
http://www.sppusa.com/home/products/machined/
--------------------------------------------------
Note added at 2 hrs 16 mins (2004-06-27 15:23:01 GMT)
--------------------------------------------------
Hi Rob, I\'m sure one of our engineers could do a better job explaining it than I can, but here\'s a stab at it. Some tools, like a radial-arm saw, can be adjusted to operate at different angles. These are the axes (plural of axis). Horizontal, vertical, diagonal, etc. axes.
--------------------------------------------------
Note added at 2 hrs 17 mins (2004-06-27 15:24:15 GMT)
--------------------------------------------------
Hi Rod!
--------------------------------------------------
Note added at 3 hrs 32 mins (2004-06-27 16:39:24 GMT)
--------------------------------------------------
Not too many hits for either 2x5 axes or 2x5 axis as an adjective, but \"axes\" is used at an Italian and French site and \"axis\" at this UK site.
2x5 Axis facility available with machining possible to high tolerances.
http://www.eccles.co.uk/cnc.htm
Peer comment(s):
| agree |
John Jory
2 hrs
|
| agree |
Manfred Mondt
: Guaranteed, in CNC it is 1 axis, 2 axes, 3 axes..99 axes.
1 day 1 hr
|
4 KudoZ points awarded for this answer.
Comment: "super, Kim, put me on the right track (I'd been wondering where the axles came in!) Your quote ("with 2x5 axes") is correct in that context, it's just that "we" Brits. leave the noun uninflected when it's an adjective: a 3-point turn covers 3 points, a 4-wheel vehicle has 4 wheels, and so on."
Discussion